Transport for NSW (Transport Infrastructure Projects) / HW10 Pacific Highway Upgrade, Oxley Highway to Kempsey – Kundabung to Kempsey - RMS.12.2535.1927

This is a joint Federal and State funded project.

This is a Quality Assurance Contract.

All tenderers must comply with the NSW Government's Code of Practice for Procurement.

The Building Code 2013 (Building Code) and the Supporting Guidelines to the Building Code 2013 (Supporting Guidelines) applies to this project. This document can be viewed at the Australian Government website at www.deewr.gov.au/building-code-2013.

Tenders are invited from suitably qualified Contractors for upgrade of HW10 Pacific Highway, Kundabung to Kempsey section. The Head Contractor / Sub-Contractor must be pre-qualified with RMS in following criteria:

Head Contractor:

• Roadworks Class R5
• Bridgeworks Class B3 or higher
• Financial Level F100 or higher
• Current accreditation under the NSW Government WHS&R Management System Guidelines for RMS Work and accredited under the Australian Government Building and Construction OHS Accreditation Scheme, established by the Building and Construction Industry Improvement Act 2005

Head Contractor / Sub-Contractor:

• Pre-tensioned concrete Class C2 or higher
• Concrete Paving Class K2 or higher
• Asphalt Work Class A2 or higher
• Traffic Control – Registered in Category G : Traffic Control
• Earthworks and Drainage – Pre-qualified for Roadworks or registered in Category E : Earthworks or Category D : Drainage, respectively
• Laboratory Testing (including Sampling) – Registered in Category L2 : Construction Industry Laboratories
• Erosion and Sedimentation Control – Registered in Category S : Erosion, Sedimentation and Soil Conservation Consultancy Services
• Bridge Formwork – Prequalified for Bridgeworks or Registered in Category F : Formwork
• Supply of Minor Steel items – Prequalified for Steel Fabrication or Registered at Class SM or higher
• Stabilisation of Earthwork – Prequalified for Roadworks or Registered in Category Z1 or with demonstrated experience in stabilisation for Road Authorities

• Pavement markings must only be undertaken by organisations accredited on the "Painting Contractors certification Program" (PCCP) administered by CSIRO.

The scope of works involves duplication and construction of dual carriageways of Highway No. 10 the Pacific Highway, associated bridges and local road adjustments. The works are approximately 14km in length and extend from just north of Barrys Creek to the Kempsey Bypass

A pre-tender meeting and a site inspection will be held at a date, time and location to be confirmed. Attendance is mandatory to submit a conforming tender. Tenderers purchasing the documents will be advised of the full details of the meeting

NSW Regions: Mid North Coast

Pre-Qualified / Invited - Only those directly invited to tender, may obtain an RFT for the purpose of lodging a tender response. Generally an invitation from a pre-qualified register of approved tenderers who have the ability to undertake the particular work or type of work proposed, a limited number of service providers are known to carry out the work or service (or in emergency or other restricted situations). Tenderers have usually been pre-qualified, accredited, or selected for the type of work and financial range. Competitive bids called from a standing offer (panel / period) contracts would also use this type.

Summary Documents_1.zip ( 8.41 MB)

These tenders are listed in ascending order of the apparent tender price at the time of opening. Some tenders may be qualified or contain errors and in view of the information given in the criteria for tender evaluation, the list should not be relied upon as an indication of which tender may be successful.

Important information

To obtain a copy of the full tender documentation, available on CD only, online payment is required. Complete all of the following steps:

 1. Select the link below, ORDER A CD/HARDCOPY. Log in or register and follow the prompts to make your payment. At the end of the payment transaction your receipt number will be displayed.

 2. Complete the CD order transaction by clicking on the link PLEASE CLICK THIS LINK TO COMPLETE THE TRANSACTION.

If you do not complete the transaction you may not receive a CD.

3. Check your mailing details on the final screen, and submit the order.

All tenders are to be lodged in the tender box at RMS's Tender Box, Level 9, 101 Miller Street, North Sydney. Tenders must be marked "HW10 Pacific Highway Upgrade, Oxley Highway to Kempsey – Kundabung to Kempsey".